Rotary 'Turbo II' Ventilator

Low Profile Design - Only 72mm Roof Protrusion

Available in Black & White

Rotary 'Turbo II' Ventilator

Low Profile Design - Only 72mm Roof Protrusion

Available in Black & White

  • Suitable for roof thickness from 1 to 21mm
  • The Low Profile ‘Turbo II’ has been designed to protrude a maximum of 72mm above the vehicle’s roof and low enough to fit under most roof mounted carrying racks, the 8 vaned air scoop rotates freely while the vehicle is in motion drawing out stale air (extraction figures shown).
  • Easy to mount – simply make a 130mm dia. hole and bond into place using suitable adhesive and seal the outside edge of the ventilator.
  • No mechanical fixings are required.
  • Moulded in ABS resin, c/w 2 bearings and a stainless steel spindle
  • Supplied with installation instructions
Wind Speed Air Extraction
Rate
mph km/h Cubic Ft
per min
Cubic M
per min
12.5 20 25.5 0.71
25.0 40 52.0 1.48
37.5 60 82.0 2.33
50.0 80 112.2 3.17
62.5 100 144.6 4.09
75.0 120 175.4 4.95

VEN027100/BLK

wgt.1.20kg

Black Moulded ABS Plastic - Only 72mm Roof Protrusion

  • Overall external diameter: 319mm
  • ø130mm Roof hole required
  • Supplied with inner grille
  • Specification detailed above

Supplied with installation instructions

Add To Quote

VEN027000/WHT

wgt.1.20kg

White Moulded ABS Plastic - Only 72mm Roof Protrusion

  • Overall external diameter: 319mm
  • ø130mm Roof hole required
  • Supplied with inner grille
  • Specification detailed above

Supplied with installation instructions

Add To Quote
All Rotary Ventilators

Added To Your Quote

  • Rotary 'Turbo II' Ventilator

    Low Profile Design - Only 72mm Roof Protrusion

    Available in Black & White

    Quantity: