Portable Bulkheads

EPS Closed Cell Core

Portable Bulkheads

EPS Closed Cell Core

The Cool-Guard temperature zoning, insulated bulkhead is a regular fixture in the leading temperature vehicle fleets across the UK.

Many different designs and configurations are available and manufactured to your specific requirements.
The Cool-Guard core is constructed using EPS (expanded polystyrene), a closed-cell moisture resistant material designed to resist water ingress and bacteria forming.


Key Benefits

  • 75mm Overall thickness, EPS lightweight core
  • Extremely lightweight and robust design
  • Reinforced vinyl skin can be supplied in a blue or grey vinyl to compliment the vehicle floor
  • Flush mounted bolts used in all applications
  • Heat sealed vinyl perimeter
  • CG-Foam Low density perimeter foam used on all bulkheads, for superior compression
  • High impact skid-guard, can be supplied in 150mm & 250mm depths
  • K-Value tested to comply with ATP Classification – documentation available upon request
  • Durable polyester webbing hinges (where applicable)
  • Can be supplied in a multitude of configurations

 

Many more options are available, please contact us for more information

Van application - Bi-fold

Additional options

  • Wheelbox flaps
  • Corner cut-outs, can be shaped to accommodate ducting/conduit etc.
  • Ventilation flaps
  • VF-Tech Thermostatic fan kits can be supplied where dual temperature control is required, 2 options are available:
  • Analogue - recommended for retrofit applications where wiring for the probe sensor & controller may not be possible
  • Digital - recommended for new build applications where wiring for the probe sensor & controller can be incorporated into the build. The digital controller allows the operator full control of the rear compartment from the cab, whilst giving a more accurate reading

Many more options are available, please contact us for more information

Add To Quote

Van application - One-piece

Additional options

  • Wheelbox flaps
  • Corner cut-outs, can be shaped to accommodate ducting/conduit etc.
  • Ventilation flaps
  • VF-Tech Thermostatic fan kits can be supplied where dual temperature control is required, 2 options are available:
  • Analogue - recommended for retrofit applications where wiring for the probe sensor & controller may not be possible
  • Digital - recommended for new build applications where wiring for the probe sensor & controller can be incorporated into the build. The digital controller allows the operator full control of the rear compartment from the cab, whilst giving a more accurate reading

Many more options are available, please contact us for more information

Add To Quote

Rigid application - Bi-fold

Additional options

  • Can be manufactured to suit numerous configurations
  • Corner cut-outs, can be shaped to accommodate ducting/conduit etc.
  • Ventilation flaps
  • VF-Tech Thermostatic fan kits can be supplied where dual temperature control is required, 2 options are available:
  • Analogue - recommended for retrofit applications where wiring for the probe sensor & controller may not be possible
  • Digital - recommended for new build applications where wiring for the probe sensor & controller can be incorporated into the build. The digital controller allows the operator full control of the rear compartment from the cab, whilst giving a more accurate reading

Many more options are available, please contact us for more information

Add To Quote

Rigid application - One-piece

Additional options

  • Can be manufactured to suit numerous configurations
  • Corner cut-outs, can be shaped to accommodate ducting/conduit etc.
  • Ventilation flaps
  • VF-Tech Thermostatic fan kits can be supplied where dual temperature control is required, 2 options are available:
  • Analogue - recommended for retrofit applications where wiring for the probe sensor & controller may not be possible
  • Digital - recommended for new build applications where wiring for the probe sensor & controller can be incorporated into the build. The digital controller allows the operator full control of the rear compartment from the cab, whilst giving a more accurate reading

Many options are available, please contact us for more information

Add To Quote

Rigid application - One-piece with centre door

Additional options

  • Can be manufactured to suit numerous configurations
  • Corner cut-outs, can be shaped to accommodate ducting/conduit etc.
  • Ventilation flaps
  • VF-Tech Thermostatic fan kits can be supplied where dual temperature control is required, 2 options are available:
  • Analogue - recommended for retrofit applications where wiring for the probe sensor & controller may not be possible
  • Digital - recommended for new build applications where wiring for the probe sensor & controller can be incorporated into the build. The digital controller allows the operator full control of the rear compartment from the cab, whilst giving a more accurate reading

Many options are available, please contact us for more information

Add To Quote
All Insulated Bulkheads

Added To Your Quote

  • Portable Bulkheads

    EPS Closed Cell Core

    Quantity: