TEALwash Hand Wash Unit

For Hot Water Hand Washing in or on Commercial Vehicles & Trailers

Double Skinned in High Impact Resistant Polyethylene - 12 & 24 Volt Options

TEALwash Hand Wash Unit

For Hot Water Hand Washing in or on Commercial Vehicles & Trailers

Double Skinned in High Impact Resistant Polyethylene - 12 & 24 Volt Options

The TEALwash is a robust, easy-to-clean mobile hand-washing solution designed specifically for motor vehicles. Ideal for use on the move, it provides a convenient way to maintain hygiene standards wherever your vehicle takes you

With a 5-litre water capacity, the TEALwash delivers more than 20 individual 12-second hand washes from a single fill. The large opening lid allows for quick and easy filling with clean water, while the integrated bowl design enables wastewater to drain away once washing is complete

Built for durability, the TEALwash features a double-skinned construction using high-impact resistant polyethylene, making it suitable for demanding vehicle environments and both internal and external installation

Key Features:

  • Compact design: H440 x W300 x D230mm (360mm when open)
  • 5-litre water capacity providing over 20 hand washes per fill
  • Fast heating system delivering 2–3 hot washes within 10 minutes
  • Requires 180mm overhead clearance for lid operation
  • Maintains an ideal water temperature of 38–43°C
  • Heater operates only when the engine is running and the battery is fully charged, preventing unnecessary power drain
  • Suitable for installation inside or outside the vehicle
  • Fully opening lid for rapid filling
  • Includes 1 metre x 25mm flexible waste tube
  • LED fault indicator for easy status monitoring
  • Supplied with fitting instructions and installation template
  • 3-wire connection system compatible with EU2–EU5 and EURO 6 compliant sensing and non-sensing vehicles
  • Voltage sensing technology (non-voltage sensing version available as an option)
  • 2-year manufacturer warranty

 Intelligent Status Indicator:

The front indicator light provides clear system status:

  • Flashing Green: Unit on standby, waiting for higher battery voltage
  • Solid Green: Unit has reached operating temperature
  • Solid Red: No water detected or tilt fault
  • Flashing Red: Hardware fault detected

Installation Requirements:

A 4mm (35 amp) cable is required for direct connection to the battery terminals
The standard TEALwash features voltage-sensing technology, with a non-voltage-sensing version available as an option

 

WSH/TEALWASH12

wgt.4.70kg empty / 9.70kg full
Voltage:12 volt
Power Spec:180 watt / 15 amp max.
Size:H485mm x W300mm x D355mm (180mm clearance required above for lid operation)
Capacity:5 litre capacity / 20 hand washes
Colour:2 tone grey
  • Bowl, tank & lid are double skinned in high impact resistant polyethylene
  • Fully automatic operation – no separate switch needed
  • Heater only operates when engine is running and battery fully charged – no drain on power
  • Fast heating, 2-3 hot washes in 10 minutes
  • 43/46ºC ideal water temperature
  • Fully opening lid for fast filling complete with 1 metre x 25mm flexible waste tube
  • Soap & towel dispensers available

When the vehicle is turned off, the battery state is quiescent at 12 Volt
When switched on, the alternator will raise the battery output to 14-14.5 Volt
The software in the TealWash will see this rise and switch the unit on when 13.8 volts is detected. The TealWash will then continue to work until the vehicle is switched off and the unit will see the battery output drop back to 12 Volt, cutting out out at 12.8 Volt
The battery will not be therefore be drained by the TealWash.

Add To Quote

WSH/TEALWASH24

wgt.4.70kg empty / 9.70kg full
Voltage:24 volt
Power Spec:250 watt / 12 amp max.
Size:H485mm x W300mm x D355mm (180mm clearance required above for lid operation)
Capacity:5 litre capacity / 20 hand washes
Colour:2 tone grey
  • Bowl, tank & lid are double skinned in high impact resistant polyethylene
  • Fully automatic operation – no separate switch needed
  • Heater only operates when engine is running and battery fully charged – no drain on power
  • Fast heating, 2-3 hot washes in 10 minutes
  • 43/46ºC ideal water temperature
  • Fully opening lid for fast filling complete with 1 metre x 25mm flexible waste tube
  • Soap & towel dispensers available

When the vehicle is turned off the battery state is quiescent at 24 Volt
When switched on, the alternator will raise the battery output to 28 Volt
The software in the TealWash will see this rise and switch the unit on when 26.6 volts is detected. The Tealwash will then continue to work until the vehicle is switched off and the unit will see the battery output drop back to 24 Volt, and will cut out at 25.5 Volt
The battery will not be therefore be drained by the TealWash.

Add To Quote
All Hand Wash Equipment

Added To Your Quote

  • TEALwash Hand Wash Unit

    For Hot Water Hand Washing in or on Commercial Vehicles & Trailers

    Double Skinned in High Impact Resistant Polyethylene - 12 & 24 Volt Options

    Quantity: