Sideguard Leg Support Beams & Extension Plates, No Cutting or Drilling Required - ASGK990 Type Approved Series

Available in two lengths, 761mm & 786mm, these beams are designed & tested to be used in conjunction with our ASGK990 series sideguard legs, and are supplied with our armour-tech 600 (AT600) surface coating, which offers unrivalled salt spray resistance.

Extension plates available, extends the beams length by increments of 5 and 10mm.

Technical Info:
Fully meets the mandatory requirements of Whole Vehicle Type Approval when used in conjunction with ASGK990 series hinged sideguard legs / rail and mounted as detailed in UNECE Regulation 73 directive

Overview:

'E' Approval certificate and full mounting instructions available upon request
Ideally suited for fridge vehicles, tippers and where conventional hinged legs cannot be mounted
Designed to suit standard chassis widths
Robust design
Armour-Tech 600 (AT600) Surface Coating / 600 hour salt spray tested
600 Hours+ Salt spray tested
Mounting: 1 x ø12.5mm hole & 1 x L20.0 x W12.5mm slot
2 x ø12.5mm High tensile bolts required for fitment

Hinged leg not included, See ASGK990 Series hinged sideguard legs to suit

Click here for more information

Share this article

What else is new?

RollaBuff® Roller Buffer Sets - RUBF650 (Horizontal) & RUBF750 (Vertical) Series

We are pleased to introduce the RollaBuff® roller buffer series, available for both horizontal and vertical applications and ranging from single to quadruple buffered units - all c/w ø25mm axles, raised grip-tread and fully, hot-dipped galvanized housings. 'RollaBuff®' is a registered trademark of Commercial Body Fittings.

Langver Curtain Tensioners now Available from CBF

Langver ratchet tensioners are precision engineered and robotically welded using CNC machined and laser profiled components, All units are supplied with Langver's unique 'Langard' coating, offering over 600 hours of salt spray resistance

Sideguard Infill Panels - CBF is the Official Distributor for Dawes Highway Safety Ltd

The aluminium infill panel solution is supplied ready-to-fit, therefore saving a significant amount of time and labour during the body building process. Enhanced lateral side protection is a recognised progressive step in the 5-star Direct Vision Standard (DVS) and specified in industry operating safety schemes, such as FORS, Mission Zero, CLOCS etc. The fitment of an infill panel helps to prevent entanglement, while displaying an approved warning message and/or icons under licence from Dawes Highway Safety.